Advertisement
Wi-Fi Direct
„
Connect to other Wi-Fi Direct-capable devices with the
Wi-Fi function without an access point or the Internet.
z Available when [Wi-Fi] is set to On (
settings」).
1
In the standby screen,
[Wi-Fi]▶z▶[Advanced]▶[Wi-Fi Direct]
z Continue by following the instructions on the
screen and operate.
Disconnecting
„
1
In the standby screen,
[Wi-Fi]
2
Select the connected access
[Disconnect]
z Disconnect with the password retained. The access
point may be automatically connected again such
as when the display is turned on.
☞
P. 73「Wi-Fi
z▶[Settings]▶
z▶[Settings]▶
point▶
Tethering
You can use the tethering function that connects Wi-Fi
compatible devices, or PCs etc. connected via USB
cable A to B 01 (sold separately) or Bluetooth
communication to the Internet by using the handset as
an access point.
z You can connect up to 16 devices in total at the same
time: a PC connected via USB cable A to B 01, 10
Wi-Fi compatible devices and five Bluetooth devices.
z Before using Bluetooth tethering, register the other
party's Bluetooth device in advance (
Bluetooth function"). As for the settings on the
Bluetooth device, refer to its manual.
1
In the standby screen,
[Network]▶[Network
[Tethering]
2
Select an item
USB
tethering: Set whether to use the USB
„
tethering.
Wi-Fi
tethering: Set whether to use the Wi-Fi
„
tethering.
Set up Wi-Fi
hotspot: Make settings for Wi-Fi
„
tethering such as network name and security.
Bluetooth
tethering: Set whether to use the
„
Bluetooth tethering.
75
☞
P. 163"Using
z▶[Settings]▶
settings]▶
Before Using the Handset
Advertisement
