3Com routers contain a software agent that can be upgraded using the command line interface. The software agent that is initially provided with the routers does not fully support GRE, L2TP, IPSec, or SNMPv3. To download a software agent that adds full support for these features, visit the 3Com support website at http://support.3com.com contains encryption capabilities that are restricted to certain users and countries so approval for these downloads can take up to 48 hours.
RMON history bucket allocation fails if more than 50 buckets are requested. RMON Matrix DS table has src and dst addresses reversed. Routers are not recognized by Network Management applications, such as 3Com Network Supervisor, unless SNMP V1 is enabled. Routing Protocol Dial-Up...
2.4. Link Layer Protocol Symptom LMI Encapsulation type has been renamed. Router 3000 series routers do not auto- negotiate with the 3Com SSII Dual Speed Hub 500. Routers only support switch type dss1 BRI S/T (European ISDN). 2.5. Network Protocol Symptom IGMP query timer defaults to 60.
R E L E A S E N O T E S F O R T H E 2.6. Routing Protocol Symptom Any route policy that uses ACLs defaults to permit all. The OSPF command, abr-summary not advertise is not working correctly. The abr-summary not advertise command does not filter the initial route in a summary update.
R E L E A S E N O T E S F O R T H E 2.8. Security Symptom ACL match counts are not logged. If you are using automatic matching order with ACLs, a rule that is similar to an existing rule, even if they have different qualifiers, is not added as a separate rule.