Download Print this page

Recharging The Batteries; Battery Powered Operation - Kenwood DPC-885 Instruction Manual

Portable compact disc player
Hide thumbs Also See for DPC-885:

Advertisement

Connections
Remove the rubber cap from the connection terminal.
Ensure that the power of the all of the components is off before connecting the cords.
Mains power operation
AC adaptor
AC power outlet
Notes:
*1.The REMOTE terminal can be used
only when the unit has headphones
with remote controller.
Do not use this terminal for other
purpose than the above.
*2.With connection to the
LINE OUT terminal,
no sound will be put
out from the
ter-
minal.
Listening through car audio
• If sound is not produced, change the tape playing
direction of the car stereo.
(Sound is not produced if the car stereo is set to play
tape side B.)
• Audio reproduction may be impossible with the follow-
ing types of car stereo:
Models which function by detecting the tape tension.
(With these car stereo models, the CAC-2 is ejected
automatically when it is inserted.)

Recharging the batteries

The rechargeable batteries should be the batteries provided as standard accessories or optional
NB-130, NB-77 or NB-88. Never use other batteries than the rechargeable batteries manufac-
tured for exclusive use with KENWOOD products.
1 Insert rechargeable batteries fol-
lowing the polarity indications.
2
1
2 Set the power OFF.
3 Plug in the AC adaptor.
Connect to DC IN jack.
DC-IN
_
+
4 Wait for 5 seconds, then press
the 7 key twice quickly.
STOP/OFF
D
5 After recharging, unplug the AC
adaptor from this unit.
Battery duration indicator
The duration at which the battery indicator
starts to blink is variable depending on the
type of battery used.
Refer to the table on the right.
Connect to cigar
lighter socket.
Car battery adaptor
DC-C3A (optional)
(Cars with DC 12V battery only)
*1
DC-IN
REMOTE
_
+
Car cassette adaptor
CAC-2 (optional)
Insert into
cassette deck
slot.
Car stereo
• When loading the rechargeable batteries, insert
from the nearer battery,i.e. in order of 1 then 2,
and be sure to observe the polarity marking in
the battery compartment. When unloading the
batteries, first remove the farther battery, i.e. in
order of 2 then 1.
• Be sure to close the top cover of the unit before
proceeding to recharging.
• Recharging is not possible during playback. Be
sure to set the power OFF before starting re-
charging.
• Recharging completes in about 4.0 hours with
the NB-130 or about 3.0 hours with the NB-77 or
NB-88. Do not recharge batteries for longer
period than above.
During recharging
After recharging
Battery indicator lights.
Extinguishes.
C
The unit returns to the power OFF status.
• Rechargeable batteries can be recharged for
about 500 times. When the playable time per
recharge reduces, please newly purchase the
optional NB-130, NB-77 or NB-88 rechargeable
batteries.
Battery Type
Blinking Timing
Battery duration
indicator
Rechargeable
When the batteries are
batteries
nearly exhausted
C
Alkaline batter-
When the batteries are half
ies
exhausted
Car battery powered operation
Car stereo
• When the unit is not used, unplug the car battery adaptor. (Otherwise,
the car battery may run out, with some car models.)
• The plug may not match the cigar lighter socket of some car models.
• If the unit cannot be operated with the car battery adaptor connected,
suspect the possibility of a blown fuse. The fuse can be replaced by
turning the electrode on the tip of the adaptor plug. When replacing the
fuse, be sure to use a fuse with a rating of 1 A.
Listening through speakers
*2
LINE OUT
Speakers
with built-in
amplifier
Audio cord
(Commercially available)
Listening through an amplifier with
CD input jacks
• Connect the cable to the amplifier's CD input jacks.
• For detailed playback procedures, please read the
instruction manual of your amplifier.
• This connection may be impossible with some am-
plifiers
INPUT
CD
Amplifier
R
INPUT
L
CD input terminal connection

Battery powered operation

This unit can be powered with three kinds of supplies including the batteries, household power
line and car battery.
The batteries may either be rechargeable batteries manufactured specially by KENWOOD or
alkaline batteries. Be sure to remove the batteries from the unit when it is not to be used for
a long period (of more than a week).
1 Open the top cover.
2 Open the cover.
3 Insert rechargeable batteries or
two LR6 alkaline batteries fol-
lowing the polarity indications.
4 Close the cover.
5 Close the top cover.
Treatment
In a while, the power will be turned off auto-
matically. Then recharge the batteries.
Playback is possible while the indicator is
blinking.
For CHINA and Duty Free Shop in JAPAN
REMOTE
Connect the speaker or
car cassette adaptor to
the
jack.
Recording onto a digital component
OPT.OUT
Optical cord (optional)
Consult your dealer before purchasing this option.
• For the recording procedure refer to the description
in the Notes of "Playback from the first track".
Note :
Digital recording is not possible with playback using
batteries or when the D.A.S.C. function is ON.
When using the OPT.OUT jack, cancel the D.A.S.C.
function and power the unit from the household AC
power supply (using the AC adaptor).
• When using a rechargeable batteries which are
new or which have not been used for more than
2 months, the operating period may be shorter
than normal. This is due to the properties of the
battery and not a malfunction. After recharging,
use the batteries on the unit until there are
exhausted.
The original performance of the battery perfor-
mance can be recovered by repeating this cycle
a few times.
• When loading the rechargeable batteries or SUM-
3/R6/"AA"-size alkaline batteries, insert from
the nearer battery,i.e. in order of 1 then 2, and
be sure to observe the polarity marking in the
battery compartment. When unloading the bat-
teries, first remove the farther battery, i.e. in
2
order of 2 then 1.
1
• We recommend the use of alkaline batteries
(LR6) because the playable time may some-
times extremely short when manganese batter-
ies are used.
• Always replace both batteries at a time.
Note
Note
After loading or unloading the batteries, be
sure to close the battery cover securely
until it clicks. (The disc may be damaged if
the battery cover is not closed tightly.)
DPC-885 (En)
OPT.
OUT
Portable MD recorder
etc.
PORTABLE MD RECORDING DMC -G7R
To optical input

Advertisement

loading