Kenwood XD-552 Instruction Manual page 19

Muting the sound temporarily
MUTE
÷ Press again to resume the original volume.
÷ The sound muting is also canceled when the volume
is controlled.
Reproducing sound with enhanced bass
XD-5....series
EX.BASS
XD-4....series
÷ Each press switches EX.BASS on and off alternately.
÷ The EX.BASS is switched off automatically during
recording or when the SOUND CONTROL jog dial is
turned.
When CD has been selected.
C D D 1 0 : 0
@
V o l u m e
Volume display
(Remote control unit only)
Blinks
C D 0 1 1 : 1 2
(EX. BASS)
Lights
EX.BASS
0
1 9
One-touch operation function
The power can also be turned ON by pressing the play
key of the CD player, the play key of the cassette deck
or the BAND key of the tuner.
It is also possible to turn the power ON by simply
pressing the 0 OPEN key.
÷ When the CD or TAPE input is selected and a disc
has been loaded in the disc tray or a tape has been
loaded in the deck for use in playback, playback starts
at the same time.
Standby mode
While the "STANDBY" indicator of the unit is lit, a
small amount of current is flowing into the unit to
back up its internal memory. (The TIMER indicator
also lights if a timer program has been activated be-
fore entering the STANDBY mode.)
This condition is referred to as the standby mode of
the unit. While the unit is in the standby mode, it can
be turned ON from the remote control unit.
This unit has been designed to minimize power con-
sumption.
Let's put out some sound
XD-SERIES (En)
19