Wired Network Connection
Your Blu-ray Disc™ player can be connected to your home network:
•
By connecting an Ethernet cable to the ETHERNET jack on the rear of your player and to a wired hub or router. Using
a wired network provides the best performance, because the attached devices connect directly to the network and
are not subject to radio frequency interference.
Connecting your player to a wired router
•
Connect an Ethernet cable (CAT5 or better with RJ45 connector) to the
and to an Ethernet jack on a hub or broadband router.
Networking equipment
(modem, etc.)
LAN
Internet
Notes:
•
Do not connect a modular phone cable to the
•
When plugging or unplugging the cable, hold the connector on the end of the cable. When unplugging, do not pull
on the cable. Press down the lock tab and pull the connector out of the jack.
•
Because there are various connection confi gurations, follow the instructions from your telecommunication carrier or
Internet service provider.
ETHERNET jack on the back of your player
Hub or broadband router
WAN
5
LAN cable
LAN
COAXIAL DIGITAL
ANALOG
HDMI OUT
USB
LAN
ETHERNET jack.
LAN
4
3
2
1
LAN cable
13