Next steps
1. Install the battery.
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
Heatsink assembly
Removing the Heatsink Assembly - Discrete
Prerequisites
1. Follow the procedure in
2. Remove the
SD
Card.
3. Remove the
base
cover.
4. Disconnect the battery.
About this task
The following images indicate the location of the heatsink and provide a visual representation of the removal procedure.
Steps
1. Loosen the seven captive screws that secure the heatsink to the system board.
2. Lift the heatsink assembly away from the computer.
Installing the Heatsink Assembly - Discrete
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
After working inside your
before working inside your
computer.
computer.
Disassembly and reassembly
45