Lenovo ThinkPad X12 Detachable Gen 1 User Manual page 36

Hide thumbs Also See for ThinkPad X12 Detachable Gen 1:
Table of Contents

Advertisement

1. Enter the UEFI BIOS menu. See "Enter the UEFI BIOS menu" on page 31.
2. Select Security ➙ Password.
3. Select the password type. Then, follow the on-screen instructions to set, change, or remove a
password.
You should record all your passwords and store them in a safe place. If you forget any of your passwords,
any potential repair actions required are not covered under warranty.
What to do if you forget your power-on password
If you forget your power-on password, do the following to remove the power-on password:
• If you have set a supervisor password or a system management password and remember it:
1. Enter the UEFI BIOS menu. See "Enter the UEFI BIOS menu" on page 31. Enter the supervisor
password or the system management password when prompted.
2. Select Security ➙ Password ➙ Power-On Password.
3. Type the current supervisor password or the system management password in the Enter Current
Password field. Then, leave the Enter New Password field blank, and tap Save.
4. In the Changes have been saved window, tap Continue.
5. Tap F10 to save changes and exit the UEFI BIOS menu.
• If you have not set a supervisor password or a system management password, contact a Lenovo
authorized service provider to have the power-on password removed.
What to do if you forget your system management password
If you forget your system management password, do the following to remove the system management
password:
• If you have set a supervisor password and remember it:
1. Enter the UEFI BIOS menu. See "Enter the UEFI BIOS menu" on page 31. Enter the supervisor
password when prompted.
2. Select Security ➙ Password ➙ System Management Password.
3. Enter the current supervisor password in the Enter Current Password field. Then, leave the Enter
New Password field blank, and tap Save.
4. In the Changes have been saved window, tap Continue.
5. Tap F10 to save changes and exit the UEFI BIOS menu.
• If you have not set a supervisor password, contact a Lenovo authorized service provider to have the
system management password removed.
What to do if you forget your hard disk password
If you forget your user hard disk password or both user and master hard disk passwords, there is no service
procedure to remove the password or recover data from the storage drive. You can contact a Lenovo
authorized service provider to have the storage drive replaced. A fee will be charged for parts and service. If
the storage drive is a CRU (Customer Replaceable Unit), you can also contact Lenovo to purchase a new
storage drive to replace the old one by yourself. To check whether the storage drive is a CRU and the
relevant replacement procedure, see "What are CRUs" on page 35.
What to do if you forget your supervisor password
If you forget your supervisor password, there is no service procedure to remove the password. You can
contact a Lenovo authorized service provider to have the system board replaced. A fee will be charged for
parts and service.
30
ThinkPad X12 Detachable Gen 1 User Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkpad x12 gen 1 lte

Table of Contents