Toro Recycler 20954 Operator's Manual page 14

Figure 23
1. Handle knob
2. Fold the handle by rotating it forward
Figure 24
1. Operating position
3. Insert the carriage bolt (with the bolt head toward the
inside) through the handle bracket and the upper hole
in the handle end. Ensure that the square edges of each
carriage bolt fits into the upper or lower square hole in
its related handle bracket
Figure 25
1. Handle knob
4. Loosely install the handle knobs and carriage bolts on
the handle brackets.
5. To unfold the handle, refer to
Unfolding the Handle (page
g189871
2. Carriage bolt
(Figure 24).
g192010
2. Folded position
(Figure 25).
g189864
2. Carriage bolt
1 Assembling and
4).
14