Using The Remote Control; Preparing The Remote Control For Use; Installing The Remote Control Batteries; Using The Remote Control With A Vcr Or A Cable Tv Converter - Toshiba 55A10 Owner's Manual

Using the remote control

Preparing the remote control for use

The remote control provided with your TV can operate most VCRs
and cable TV converters as well. It is already programmed to operate
Toshiba VCRs; however, you will have to program it if you want to
operate non-Toshiba equipment (see "Programming the remote
control for use with a VCR or a cable TV converter" on page 12.)

Installing the remote control batteries

To install the batteries:
1. Slide the battery cover off the back of the remote control.
2. Install two "AA" size batteries. Match the + and – signs on the
batteries to the signs on the battery compartment.
3. Slide the battery cover back onto the remote control until the
lock snaps.
Using the remote control with a VCR or a cable
TV converter
To control a Toshiba VCR:
Press the VCR button until it blinks. The shaded buttons in the
illustration at right will then control the VCR. The unshaded
buttons will operate the TV as usual.
If you own different brands of VCRs, program the remote control
to recognize the brand of your VCR. (See "Programming the
remote control for use with a VCR or a cable TV converter" on
page 12.)
To control a cable TV converter:
Program the remote control to recognize the brand of your
converter. The shaded buttons in the illustration at right will
control the cable TV converter.
Press the CABLE button to control the cable TV converter.
Note:
This remote control's functions may or may
not operate your VCR or cable TV converter.
Refer to the owner's manuals supplied with
the equipment to see which features are
available. In addition, the original controllers
may have features not available on this remote
control. If you would like to continue to use
these features, you may want to use the
original remote control.
Caution:
• Dispose of your batteries in a designated
disposal area. Do not throw your batteries
into a fire.
• Do not mix battery types or combine used
batteries with new ones.
• Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartment.
• If you do not intend to use the remote
control for a long time, remove the
batteries.
VCR
POWER
POWER
MTS
TIMER
VCR
TV CABLE
3
1 2
Channel
CH
4 5 6
Channel
7 8 9
Number
VOL
CH RTN
100 0 ENT
ENT
ADV
MENU/
FAV FAV
- +
ENTER
ADV
MUTE RECALL TV/VIDEO SURROUND
STOP
STOP SOURCE PLAY PIP
PLAY
FF
REC TV/VCR REW
Fast Forward
STILL LOCATE SWAP Rewind
TV/VCR
Record
11