Getting Started - Rio Yes LAHC6 User Manual

© The Dezac Group Ltd 2014
© The Dezac Group Ltd 2014
© The Dezac Group Ltd 2014

GETTING STARTED

✓
PATCH TEST
24 hours before treatment check for any reaction by treating a
small area first.
The + and - buttons increase or reduce power levels. Treat
several areas on each power level up to the maximum power
level for your skin type (see table). If you feel any discomfort,
the previous lower power level is the maximum power level you
should use.
A slight redness may occur, but not always, within an hour of
treatment. This localised redness is quite normal. However, if
any redness remains after 24 hours this would indicate the power
level selected was too high for your skin type. Use the next power
level down during treatment.
NOTE: Skin colour varies on different areas of the body - you
may find that you need different power level settings for different
areas. Each area should be tested for the appropriate maximum
power level.
13