Cateye Loop 2 SL-LD140RC-R Manual

SL-LD140RC-R
Manual
Before using the product, please thoroughly
read this manual and keep it for future
reference.
Design Pat. Pending
Copyright© 2017 CATEYE Co., Ltd.
5
SLLD140RCR-170516
WARNING!!!
• Do not use a damaged rubber band.
• Always attention to the remaining battery
power by checking the indicator periodically
while using.
CAUTION!
• Stop your bicycle to operate the switch.
• Keep the light away from children.
• This product is water-resistant under normal
daily use and can be used in the rain. However,
do not intentionally submerge it in water.
LITHIUM-ION BATTERIES
Cautions on recharging
• We recommend using 500+mA (USB2.0) USB
battery charger.
• Avoid charging in direct sunlight or in a vehicle
parked under direct sunlight, and make sure to
charge only when the ambient temperature is
between 5 and 40°C (41°F and 104 °F).
• Before charging, be sure that no dust or other
foreign objects attach to the USB plug.
• Do not subject the light to vibrations while
charging.
• When your PC is in sleep state, the unit
cannot be charged.
• Once charging is complete, be sure to
disconnect the USB plug.
• Charging and lighting times are approximate
values, and will vary by environmental and
user conditions.
Cautions in use
• Charging, discharging, and storing in high
temperatures will cause the rechargeable
battery to deteriorate faster. Do not place the
light inside a vehicle or near a heater.
• If the illumination time is significantly reduced
even after proper charging, the rechargeable
battery may be nearing the end of its service
life. Dispose of the battery as described in
"PRECAUTIONS ON DISPOSAL" .
Cautions on storage
Cool and dry storage is recommended. For long
period storage, it is important to charge the
battery 1 hours every 6 months.
Cautions for dispose
When disposing of the light unit, remove the
internal rechargeable battery and dispose of it
according to local regulations.
ENG
1
HOW TO CHARGE
Always charge the product before use.
USB cable
To PC or USB battery charger
HOW TO CLOSE THE CHARGE JACK COVER
2
HOW TO MOUNT
Attach securely in the mounting position.
ø
〜
32 mm
ø
22 mm 〜
3
SWITCH OPERATION
The light will turn on in the lighting mode previously selected.
Click Click
* When the remaining battery power is low, the indicator beside the switch turns on.
Charge the product as soon as possible.
Light unit
Charge jack cover
1
2
3
Press and hold
OFF
Click
Constant
Approx. 2.5 h
USB cable
(MICRO USB)
Indicator
Charging Charging is completed
Standard charging time
3 h
( USB2.0 )
Approx.
4
ON
Lighting mode switch
Flashing
Click
Approx. 10 h