Snapper XD 1696777 Owner's Manual page 13

ASSEMBLY INSTRUCTIONS
UNFOLDING AND ADJUSTING LOWER HANDLE (See Figure 2)
W A R N I N G
Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when folding or unfolding the handle.
• If a cable is damaged, contact an Authorized Service Dealer.
• Pull and rotate the handle knobs (1) 90° on both sides to loosen the lower handles (2) on both
sides.
• Move the lower handles to the operating position. You may raise or lower the handle to a
position comfortable for you. There are 3 positions (3) for you to choose. Release the handle
knobs to lock the lower handle into position.
Note: Ensure both sides are set at the same position for proper assembly.
(2) Lower handle
(3) 3 positions
Fig. 2
(1) Handle knob
Locked
position
13
Unlocked
position