Download Print this page
Rockwood 8PC HVLP PAINT GUN SET Instructions Manual

Rockwood 8PC HVLP PAINT GUN SET Instructions Manual

Advertisement

Quick Links

Item #16292
8
HVLP
PC
PAINT GUN SET
INSTRUCTIONS

Advertisement

loading

Summary of Contents for Rockwood 8PC HVLP PAINT GUN SET

  • Page 1 Item #16292 HVLP PAINT GUN SET INSTRUCTIONS...
  • Page 2: Specifications

    This 8 PIECE, 2 PAINT GUN SET provides a comprehensive array of paint guns and equipment required to do a complete paint job from primer, sealer, base coat through to clear coat. CONTENTS (1) HVLP Paint Gun with 1.4mm needle/nozzle set (1) HVLP Paint Gun with 1.7mm needle/nozzle set (2) 1000 ml.
  • Page 3: Safety Information

    SAFETY INFORMATION READ INSTRUCTIONS • Thoroughly read and understand these product instructions before using this equipment. Failure to follow all warnings can result in tool damage or serious physical injury. • Keep these product instructions for future reference. FIRE AND EXPLOSION HAZARD! •...
  • Page 4 SET-UP • Remove all components, identify them and become familiar with their purpose. • BEFORE FIRST USE – Following Gun Cleaning Procedure, clean out the paint cup, nozzle as well as the paint gun internal air and paint passages with a solvent such as Eastwood PRE or Aerosol Injected Cleaner to remove any residual manufacturing impurities or lubricants that may be present.
  • Page 5 GUN SETTINGS • AIR CAP - Make sure the Air Cap is properly oriented in a horizontal plane to produce a vertical fan spray pattern by viewing the HVLP Paint Gun from the front. To adjust, loosen Retaining Ring by rotating counter-clockwise slightly, adjust Air Cap then re-tighten Retaining Ring. •...
  • Page 6 CLEAN-UP • Disconnect air supply to gun. • Remove Paint Cup and pour unused coating into proper container. • Wipe out any excess coating then thoroughly rinse the Paint Cup with a mild solvent compatible with the coating being used. •...
  • Page 7: Troubleshooting

    TROUBLESHOOTING PROBLEM CAUSE CORRECTION Paint or Film Gun Produces Buildup on Air Disconnect air supply and clean buildup from an Uneven Cap Blocking Air Cap. Spray Air Holes Gun “Spits” Paint or Film Disconnect air supply and clean buildup from or Sputters;...
  • Page 8: Additional Items

    ADDITIONAL ITEMS #10041Z Eastwood PRE Painting Prep, Aerosol #12846ZEW Aerosol Injected Cleaner #14829 Gerson One-Step Respirator #20405 Gen-Nex Painter’s Coveralls, Large #20406 Gen-Nex Painter’s Coveralls, XLarge #50207 Dekups #DPC-11 Adapter If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >>...

This manual is also suitable for:

16292