Removing The Seat Cushions; Fitting The Seat Cushions; Removing The Backrest - Mercedes-Benz A-Class Series Owner's Manual

Stowage areas
196

Removing the seat cushions

Insert the seat belt into seat-belt
X
extender :.
Fold the left-hand or right-hand seat cush-
X
ion ; forward.
Grasp release handle ? and pull seat cush-
X
ion = upwards.
Remove seat cushion =.
X
If the backrest is to be removed: fold down
X
hinge A.
If the backrest is only to be folded down:
leave hinge A as a support for the backrest
in the position shown above.
i
Vehicles with a TIREFIT kit or the
"Minispare" emergency spare wheel:
You can store the seat cushions under the
variable luggage compartment floor.
! Vehicles with spare wheel, loudspeaker
system or sound system:
You cannot store any seat cushions under
the variable luggage compartment floor.

Fitting the seat cushions

Fold hinge A upwards if necessary. Only
X
then can the seat cushion be slid in.
Slide the seat cushion onto the fixtures
X
until it engages.
i
For easier alignment of the cushions,
observe the arrows on the rear of the seat
cushions.
Swing the seat cushion back.
X

Removing the backrest

Fold the seat cushion forward
X
( page 196).
Y