Table of Contents
Advertisement
• The memory values shown on the previous page are the total for both the open memory area and the
secret memory area.
• Press AC to clear the memory capacity screen.
To display the number of items in each mode
1. While the main menu is displayed, press FUNCTION.
2. Use
and
to select "Number of Items" and press EXE.
Open Memory Area
Secret Memory Area
•
If you perform the above procedure while in the open memory area, the number of items stored in the
open memory area only are displayed. To see the number of items in the secret memory area, you must
perform the above operation while accessing the secret memory area.
How memory capacity is calculated
You can store up to 27,014 bytes of data in memory. There is no limit on the amount of memory you can use
in each mode, but the total amount of data stored is 27,014 bytes. The following shows how many bytes the
data in each mode takes up. One character (each newline operation counts as a character also) takes up one
byte.
Mode
Telephone Directory
Schedule
Data Memo
Examples:
Telephone Directory
When all items use 8 characters for the name, 10 characters for the phone number, and 20 characters
for the address, you can store approximately 640 items.
Schedule
When all items use 20 characters, you can store approximately 840 items.
Data Memo
When all items use 10 characters for the memo name and 10 characters for the memo content, you can
store approximately 1,170 items.
Tel (Busi) :
27
Tel (Pers) :
50
Schedule :
1
Tel (Busi) :
3
Tel (Pers) :
4
Schedule :
2
Bytes per Data Item
(name) + (telephone number) + (address, etc.) + 4
(description) + 12
(memo name) + (memo contents) + 3
— 5 —
Advertisement
Table of Contents
