Connecting To Power - Toshiba DMF82XKU Owner's Manual

M F O
18
EDIA RAME VERVIEW
4
Remove the old battery.
5
Place a new coin-shaped battery
(CR2025) with the + side up on the
holder. Keep the holder horizontal so
that the battery does not fall through.
CAUTION
♦ Danger of explosion if battery is
incorrectly replaced. Replace only with
the same or equivalent type.
6
Insert the holder into the remote
control.
The remote control battery contains
Perchlorate Material - special handling
may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate.

CONNECTING TO POWER

1
Connect one end of the AC adaptor
to the Digital Media Frame.
2
Plug the other end of the AC adaptor
into the outlet.
■
Turning on the Digital Media
Frame
Press the POWER button (on the side
of the Digital Media Frame) or the
ON/STANDBY button (on the remote
control) to turn on the Digital Media
Frame. The power indicator will turn to
green.
CAUTION
♦ Do not connect the power plug to a
power outlet other than that indicated
on the label, as this can result in a risk
of fi re or electric shock.
♦ Do not connect or disconnect the
power plug with wet hands. Doing so
may cause electric shock.
♦ Do not use an AC adaptor other than
one specifi ed, as it can cause a fi re or
damage to the Digital Media Frame.
AC Adaptor