Fluke 374 FC User Manual page 6

374 FC/375 FC/376 FC
Users Manual
•
•
•
•
•
•
•
•
•
4
Find Quality Products Online at:
Prior to use, ensure the Product is clean, dry, and in good repair. Do not use the
product if has been exposed to water, cleaning solutions, battery electrolyte
leakage, or other contaminants that may have entered the enclosure. These
contaminants can reduce or eliminate the protection provided by the Product
against electric shock or arc explosion. Have the product dried, cleaned, or
repaired as necessary to ensure continued safe operation
Use only correct measurement category (CAT), voltage, and amperage rated
probes, test leads, and adapters for the measurement.
Do not exceed the Measurement Category (CAT) rating of the lowest rated
individual component of a Product, probe, or accessory.
Comply with local and national safety codes. Use personal protective equipment
(approved rubber gloves, face protection, and flame-resistant clothes) to prevent
shock and arc blast injury where hazardous live conductors are exposed.
Before each use, examine the Product. Look for cracks or missing pieces of the
clamp housing or output cable insulation. Also look for loose or weakened
components. Carefully examine the insulation around the jaws.
Do not use test leads if they are damaged. Examine the test leads for damaged
insulation and measure a known voltage.
Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
Do not measure current while the test leads are in the input jacks.
Do not apply more than the rated voltage, between the terminals or between each
terminal and earth ground.
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com