Toshiba PA3897U-1CAS Camileo BW10 - S User Manual page 28

28
Getting Started
Inserting and removing a media card
NOTE
To install a media card:
1 While pressing down on the slot cover release latch, slide the
slot cover out and open.
2 Insert a memory card into the slot until it locks into place as
shown below.
(Sample Illustration) Inserting the media card
3 To remove an installed media card, gently press the card
inward to release it.
The card pops out slightly.
4 Pull the card straight out.
(Sample Illustration) Removing the media card
5 Close the battery/media card slot cover. Secure the cover by
sliding it back into place.
An SD™ Card must be purchased separately.