Table of Contents
Advertisement
This hot key cycles through the settings in the following order
(only the first option is available when you do not have an
external monitor attached) (the last option is available only if
you are in Extended Display Mode):
❖
LCD—Internal display only
❖
LCD + CRT—Internal display and external monitor
simultaneously
❖
CRT—External monitor only
❖
LCD + CRT Multi Monitor—Internal display and external
monitor, with one acting as the primary display and the
other as an extended desktop
❖
Swap—Switch primary display between internal display
and external monitor when using extended desktop
❖
Swap-Switch primary display between internal display
and external monitor when using extended desktop
(Sample Image) Display options window
NOTE
The right-most icon in the above illustration is for the Swap Image
Display mode. This mode is available only if the current setting is an
extended desktop mode (Built-in Display and External Monitor, or
Built-in Display and TV). In extended desktop mode, the image is
split into two sides, one side per display device. To swap sides,
select Swap Image Display.
3
Release the
Using external display devices
Fn
key.
Getting Started
69
Advertisement
Table of Contents
