Power-On Sequence - Epson GT-10000+ Setup Manual

Power-on sequence

Keep the following in mind every time you turn on your computer
and SCSI devices, including the scanner.
❏ Be sure to turn on the SCSI device which is connected at the
❏ For Windows 95, 98, 2000, or Millennium Edition users:
Downloaded from:
farthest end of the daisy chain first, then the second farthest
and so on, until finally your computer. If you attempt to use
a SCSI device which has been turned on after the computer,
it may not work properly, or the computer may not work
properly.
The first time you turn on the computer after turning on the
scanner, one of the following dialog boxes or similar may
appear.
Windows 98
http://www.usersmanualguide.com/
Windows 95
Windows 2000
Setting up the Scanner
2
2-13