Table of Contents
Advertisement
WinDVD will not function properly with "debug" software
installed.
The WinDVD application will not function properly if it detects
that debug software is present on the system. Remove the debug
software to restore functionality of WinDVD.
Minimum system requirements
WinDVD performs best when these recommended components
are present in your system:
Sound card (with 48 KHz sampling rate support)
DirectX
DVD-ROM drive with DMA enabled (only available with
Microsoft OSR 2.1 or above with PIXX 4.0 and USB support
added)
WinDVD software
WinDVD: error messages
This table offers descriptions and resolutions for error messages
that may appear when using WinDVD.
Error message and additional
information
The disc in the DVD-ROM
drive is not a valid disc
type.
Valid disc types are
DVD-Video and audio CD.
If Something Goes Wrong
Resolving a hardware conflict
®
8.1 or higher (Source: Microsoft)
Resolution
Ensure the disc is a valid
disc type.
If the disc works in other
players, try using a disc
cleaner.
The disc may require fea-
tures that are not supported
by WinDVD.
221
Advertisement
Table of Contents
