Directing The Display Output When You Turn On The Computer - Toshiba NB205-N310/BN User Manual

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
NOTE
The quickest way to change the display output settings is to use the
display hot key (
1 Press
2 While holding down
you want takes effect. Briefly pause each time you press the
key to allow time for the display to change.
This hot key cycles through the settings in the following order
(only the first option is available when you do not have an
external monitor attached):
(Sample Image) Display options window
3 Release the
Using external display devices
Some modes are only available with the appropriate device attached
and turned on.
+ ):
Fn F5
and simultaneously.
Fn F5
LCD—Internal display only
LCD + CRT—Internal display and external monitor
simultaneously
CRT—External monitor only
key.
Fn
TECHNICAL NOTE: You can also change these settings using the
Display Properties box.
Set the option for the video controller by clicking Start,
Control Panel, Appearance and Themes, and then Display. Choose
the Settings tab, click the Advanced button, select Display Device,
select the applicable Monitor type, and then click Apply or OK.
Getting Started
Fn , press F5 repeatedly until the setting
59
F5