Operating The Hydraulic Controls And Options On Eh Models; Control Pendant Legend; Figure 14: Hydraulic Control Valves - Toro MH-400 Operator's Manual

Figure 14: Hydraulic control valves

A. Conveyor belt direction (left control valve)
B. Raise and lower MH-400 (center control valve)
C. Options on and off (right control valve)
D. Option hydraulic quick connectors
Operating the Hydraulic Controls and
Options on EH Models
: Before operating the
W
ARNING
MH-400, read and understand the entire
Operator's Manual and all safety decals.
Page 24
Figure 15: Control Pendant For EH Models

Control Pendant Legend

Floor Speed
Option Speed
Preset Setting
Not Used
Option start followed by belt start
Operating Instructions