Toshiba Satellite U200 Series User Manual page 183

U200 user's guide
Hide thumbs Also See for Satellite U200 Series:
Table of Contents

Advertisement

The computer starts but when you press a key nothing
happens.
Verify that the active program accepts text input. Try clicking
your mouse on an area where you can type text and try typing
again.
Your computer may be in Standby mode and have a software
or resource conflict. When this happens turning the power on
returns you to the problem instead of restarting the system.
To clear the condition, press
Clearing the condition may get the computer running, but it
will not solve a resource conflict. Read the documentation
that came with the conflicting device and
hardware conflict" on page
The computer is not accessing the hard disk or the
optional external diskette drive.
Your computer normally loads the operating system from the
hard disk. If you have a hard disk problem, you will not be
able to start the computer. Insert a system diskette into the
optional external diskette drive and press
machine starts and use the arrow keys to select the boot-up
device.
The computer displays the
message.
The computer was placed in Standby mode and the battery
has discharged. Data stored in the computer's memory has
been lost. Data stored in the computer's hard drive may not be
affected.
Always save your data even when you are using Standby. If
your battery fully discharges, information that has not been
saved will be lost. Your computer can be configured to warn
you when the battery is running low see
the main battery runs low" on page
If Something Goes Wrong
Problems when you turn on the computer
,
, and
Ctrl
Alt
Del
187.
WARNING RESUME FAILURE
"What to do when
105.
183
simultaneously.
"Resolving a
F12
when the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents