Toshiba M105-S1021 User Manual page 65

2 While holding down
you want takes effect. Briefly pause between pressing the
key to allow time for the display to change.
This hot key cycles through the available settings in the
following order:
❖
Built-in display only
❖
Built-in display and external monitor simultaneously
❖
External monitor only
❖
Built-in display and TV
❖
TV only
Only devices currently connected to the computer will be
NOTE
displayed as available settings.
3 Release the
TECHNICAL NOTE: You can also change these settings using
the Display Properties Box.
Set the option for the video controller by clicking Start, then
Control Panel, Appearance and Themes, and then Display.
Choose the Settings tab, click the Advanced button, select
Display Device, select the applicable Monitor type, and click
Apply or OK.
Using external display devices
, press
Fn
key.
Fn
Getting Started
repeatedly until the setting
F5
65
F5