Swann Flexcon In-Well Installation, Warnings, And Operation Instructions

f I l
l e x c o n n d u s t r I e s I M I t e d
P c : I -W t M
roducts overed n ell anks anufactured and
Important: Read carefully the installation, operating and maintenance instructions manual ("Manual") to avoid serious personal injury and/or
property damage and to ensure safe use and proper care of this Product.
Warranty - Warranty is extended to all purchasers of the new product. The warranty is non-transferable. Flexcon warrants to the purchaser or first
user of the new Product that at the time of manufacture, the Product is free from defect in material or workmanship for five (5) years from the date
of manufacture. Any warranty claim must be made within five (5) years (unless another time period is set forth in the Manual), measured from the
date of manufacture.
In the event of a breach of the foregoing warranty and upon proper and timely notification to Flexcon, Flexcon will at its option either: make
repairs to correct any defect in material or workmanship, or supply and ship either new or used replacement parts or products. Flexcon will not
accept any claims for, nor will Flexcon be responsible for, any other costs including labor.
exclusions - This warranty does not cover any failure or problem unless it was caused by a defect in material or workmanship. In addition, this
warranty shall not apply:
• If the Product is not correctly installed, operated, repaired or maintained as described in the Manual provided with the Product.
• To any failure or malfunction resulting from (i) misuse or abuse, (ii) improper or negligent handling, shipping (by anyone other than Flexcon),
storage, use or operation, or (iii) damages to the tank caused by lightning, floods, fire, freezing or any other environmental condition.
• To damages caused by any unauthorized alteration to the Product, or any attempt to repair tank leaks or parts.
• To any failure or problem resulting from the use of the Product for any purpose other than those specified in the Manual.
• If the Product is used anywhere except the United States, its territories or possessions, or Canada.
• To labor costs, shipping charges, service charges, delivery expenses, administrative fees or any costs incurred in removing or reinstalling the Products.
• To any claims submitted to Flexcon or a Flexcon authorized distributor or dealer more than 30 days after expiration of the applicable warranty time
period described in this Warranty;
• To any repair or replacement costs not authorized in advance by Flexcon.
Warranty limitations - All implied warranties including the implied warranties of merchantability and fitness for a particular purpose are
specifically disclaimed.
limitations of remedies - The remedies contained in this warranty are the purchaser's or first user's exclusive remedies. In no circumstances
will Flexcon be liable for more than, and purchaser-first user's remedies shall not exceed, the price paid for the Product. In no case shall Flexcon
be liable for any special, indirect, incidental or consequential damages, whether resulting from non-delivery or from the use, misuse, or inability to
use the Product or from defects in the product or from Flexcon's own negligence or other tort. These exclusions apply regardless of whether such
damages are sought for breach of warranty, breach of contract, negligence, strict liability, in tort or under any other legal theory. Excluded damages
include, but are not limited to, inconvenience, loss or damage to property, mold, loss of profits, loss of savings or revenue, loss of use of the
Products or any associated equipment, facilities, buildings or services, downtime, and the claims of third parties including customers.
What to do If you Have a Problem covered by this Warranty – You must notify the authorized Flexcon distributor or dealer who sold you
the Product within 30 days of the event leading to the Warranty claim. Any covered Warranty service must be authorized by the Flexcon distributor
or dealer which sold you the Product. If you do not receive a prompt response, call Flexcon directly at 781.986.2424. Notice of a Warranty claim
should be submitted within 60 days of the event leading to the claim by the authorized distributor/dealer to Flexcon at the following address:
Flexcon Industries, Warranty Claim Dept., P.O. Box 782, Randolph, MA 02368
Before Flexcon determines to provide any replacement part or Product, it may, as a pre-condition to making such a determination, require that the
warranty claimant ship the Product, postage prepaid, to an authorized Flexcon distributor, or to Flexcon, and provide proof of purchase evidenced
by the original sales receipt.
replacement Product Warranty - In case of replacement of a Product or any component part, Flexcon reserves the right to make changes in
the design, construction, or material of the substitute components or products, which shall be subject to all of the terms and limitations of this
Warranty, except that the applicable warranty periods shall be reduced by the amount of time the warranty claimant owned the product prior to
submitting notification or the warranty claim.
Owners Record Keep for later use
Serial number (see tank data label at bottom of tank): __________________________________________________________________________
Model (see tank data label at bottom of tank): _______________________________________________________________________________
Date Installed: _________________________________________________________________________________________________________
Installer Name: _________________________________________________________________________________________________________
Telephone number: ____________________________________________________________________________________________________
Retain copy of cancelled check and installation receipt
300 Pond Street, Randolph, Massachusetts 02368, Call 1.781.986.2424, Fax 1.781.986.2029, www.flexconind.com © 2018 Rev. 8.18
P W
r o d u c t a r r a n t y
d f I
IstrIbuted by lexcon ndustrIes
(4)
I , W
n s t a l l a t I o n a r n I n G s
f
l e x c o n
o
PeratIon
This well tank has been designed to store and deliver
water under pressure between pump cycles in a domestic
water system.
W
Hat It does
Without a storage tank, a domestic water system's pump
would cycle (turn on) every time there was a demand for
water. This frequent and potentially short cycling would
shorten the useful life of the pump. Flexcon well tanks are
designed to store water when the pump is running and
then deliver pressurized water back to the system when the
pump is shut off.
this is the safety alert symbol. it is used
to alert you to Potential Personal injury
hazards. obey all safety messages that
follow this symbol to avoid Possible
injury or death.
WarnInG
indicates a Potentially hazardous situa-
tion which, if not avoided, could result
in serious injury or death.
300 Pond Street, Randolph, Massachusetts 02368, Call 1.781.986.2424, Fax 1.781.986.2029, www.flexconind.com © 2018 Rev. 8.18
, o I
a n d P e r a t I o n n s t r u c t I o n s
I - W t
n e l l a n k s
WarnInG This product must be installed
by a Qualified Professional
following all local and national plumbing and electrical
codes. Read and understand fully the instructions included
here and those on the Flexcon website which are updated
on a regular basis. This product must be inspected annually
by a qualified professional for any signs of corrosion or
leakage and replaced immediately if these signs are
present. Failure to follow these instructions may result in
serious injury, death and/or property damage and will void
the product warranty.
Explosion Hazard This
WarnInG
well tank is designed for water
storage at a maximum pressure and a maximum temperature
as detailed in this manual. A properly sized pressure relief
valve set at a maximum of 100 psi must be installed in the
system. This tank is shipped with a pre-charge of air and any
adjustment to the pre-charge must be done prior to
installation and at ambient temperature. Do not adjust the
pre-charge of this tank if the product is corroded or damaged
or shows any signs of diminished integrity. The maximum
allowable pre-charge in this expansion tank is 80 psi.
Failure to follow these instructions is UNSAFE and may
result in serious injury, death and/or property damage.
WarnInG This well tank and the associ-
ated piping will in time leak.
This tank must be installed in a location where water
leakage will not cause property damage and there must be
means for adequate drainage. This tank must not be
installed in a location that is subject to freezing. This
tank must be installed in the vertical position. The
manufacturer of this product is not liable or responsible for
any water damage associated with the installation and or
failure of this product. Failure to follow these instructions
may result in personal injury, death and/or property
damage.
This tank is intended for use on
WarnInG
potable water systems only and
any other use may be dangerous and will void the warranty.
This products performance and lifespan can be significantly
impacted by aggressive water conditions. A water test should
be conducted specifically looking for corrosive water, acids
and other relevant water contaminants which if present must
be treated appropriately. The system piping must be
properly grounded to earth. A dielectric union may be
required in the system. Failure to follow these instructions
may result in serious injury, death and/or property damage.
C a l i F o r n i a p ro p o s i T i o n 6 5
WarnInG
WarninG! This product contains a
chemical known by the State of California to cause cancer and birth
defects or other reproductive harm. (California installer-California
law requires that this notice be given to the consumer/end user of
this product.) For more information, contact the manufacturer at
www.flexconind.com.
These instructions and warnings are subject to periodic updates on the
Flexcon website www.flexconind.com and should be regularly reviewed
by the consumer for important safety and instruction updates.
(1)