Directing The Display Output When You Turn On The Computer - Toshiba L515-S4007 User Manual

80
Getting Started
Using external display devices

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
NOTE
The quickest way to change the display output settings is to use the
display hot key (
1 Press
2 While holding down
you want takes effect. Briefly pause each time you press the
key to allow time for the display to change.
This hot key cycles through the settings in the following order:
(Sample Image) Display options window
3 Release the
Some modes are only available with the appropriate device attached
and turned on.
+ ):
Fn F5
and simultaneously.
Fn F5
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
TV (or other external video device) only
External monitor and TV simultaneously
Built-in display and TV (or other external video device)
simultaneously
Built-in display and external monitor (extended desktop)
Built-in display and TV (extended desktop)
External monitor and TV (extended display)
Swap—Switch primary display between internal display
and external monitor when using extended desktop
Fn key.
Fn , press F5 repeatedly until the setting
F5