Toshiba L500-ST2521 User Manual page 187

L500-st2521 user's guide
Table of Contents

Advertisement

If another computer is on the same network, verify that it has
network access, and can connect to the Internet. If, for
example, the other computer cannot browse to a public Web
site, the ISP's (Internet Service Provider) service may be
disrupted.
Verify that the Service Set Identifier (SSID), or network name,
is correct—i.e., that it matches the SSID assigned to the access
point you are attempting to connect through. SSIDs are case-
sensitive. Toshiba provides a Client Manager utility for setting
and managing SSIDs.
Check the Control Panel's Hardware and Sound Device
Manager to verify that the Wi-Fi
Windows
Carefully note any error messages—these will be very helpful
if you should confer with a support technician at a later time.
NOTE
To enable or disable wireless communication, use the Hot Key
Fn+F8
page
Verify that the network connection is configured to obtain its
Internet Protocol (IP) address dynamically:
1
Click Start, and then Network.
2
Click View Status.
3
Click Details.
4
Verify that the DHCP Enabled setting is set to Yes.
5
Click Close.
Use IPCONFIG to verify that the computer has a useful IP
address—one other than the private address of
169.254.xxx.xxx assigned by Windows
1
Click Start to open the Start menu.
2
Type
3
At the top-left of the Start menu, click
command prompt.
4
Enter
The IP address for each active network adapter will be
displayed.
Resolving a hardware conflict
®
operating system, and that the driver is loaded.
. For more information see
198.
in the search field.
Cmd
IPCONFIG /ALL
If Something Goes Wrong
®
adapter is recognized by the
"Hot Keys/TOSHIBA Cards" on
®
.
and press
.
Enter
187
to open the
cmd.exe

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L500-st5507L500-st55x2L500d-st5501L500d-st5506L500d-st55x1L505-es5011 ... Show all

Table of Contents