Table of Contents
Advertisement
If the problem is with an optical data disc, refer to the software's
documentation and check that the hardware configuration meets the
program's needs.
The disc will not come out of the drive when you click the
eject button on the screen.
Press the button on the optical drive itself. For additional
information see
does not slide out." on page
Sound system problems
No sound is coming from the computer's speakers.
Adjust the volume control.
Try pressing
Check that the volume control on the computer is turned up.
If you are using external headphones or speakers, check that they
are securely connected to your computer.
The computer emits a loud, high-pitched noise.
This is feedback between the microphone and the speakers. It
occurs in any sound system when input from a microphone is fed to
the speakers and the speaker volume is too loud. Adjust the volume
control.
Printer problems
This section lists some of the most common printer problems.
The printer will not print.
Check that the printer is connected to a working power outlet,
turned on and ready (on line).
Check that the printer has plenty of paper. Some printers will not
start printing when there are just two or three sheets of paper left in
the tray.
Make sure the printer cable is firmly attached to the computer and
the printer.
Run the printer's self-test to check for any problem with the printer
itself.
Make sure you installed the proper printer drivers as shown in
"Setting up a printer" on page 80
with the printer.
"You press the disc eject button, but the drive tray
174.
to see if volume mute is disabled.
Fn + Esc
If Something Goes Wrong
Sound system problems
or in the instructions that came
175
Hide quick links:
Advertisement
Table of Contents
