AT&T Genie Mini C Activation & Equipment Return Instructions

Activation & Equipment
Return Instructions
We're committed to bringing you the best in video entertainment every day. Your
replacement receiver is enclosed. Here's how to connect and activate your new receiver,
plus how to return your non-working equipment.
To avoid non-return fees, follow important return instructions at the end of this document.
1 2
Connect Reset
1 Connect your replacement Genie Mini
· Carefully stack your replacement Genie Mini on top of your non-working Genie Mini.
· Transfer one connection at a time from the non-working Genie Mini to the replacement
Genie Mini, except for the power cord. Need help? Go to
· Plug the power cord into the replacement Genie Mini, then into a power outlet. If the
receiver doesn't automatically power up, press the POWER button.
· Turn on your TV.
2 Reset your remote
· On the remote, press and hold MUTE and SELECT.
· The GREEN LED will blink twice.
· Press 9-8-7 on your remote.
· The GREEN LED will blink four times if successful.
3 Setup
Go to the Genie
®
· On the remote, press MENU, select SETTINGS, then WHOLE-HOME. Select MANAGE
CLIENTS, and then ADD CLIENTS.
· Note the PIN that displays on the screen—you will need to enter the PIN on your Genie Mini
at its location.
· Keep the Genie on the ADD A CLIENT screen.
Go to the location where you have your Genie Mini.
· Using your remote control, enter the PIN you noted previously on the ENTER PIN screen.
· Select REPLACE A LOCATION, choose the Client you want to remove and select REPLACE.
· Select YES, REPLACE to confirm your choice.
Note: The new Genie Mini may display a flashing red LED and the screen may flash gray
intermittently during this setup step.
Return to the Genie
®
· Select DONE on the ADD A CLIENT screen.
If the Genie Mini displays the Enter PIN screen again after the 2-minute countdown, please
call 800.531.5000 to complete your activation.
3 4 5
Setup Activate Program
att.com/equipmentinstall
6
Return
1
2
3
Genie Mini
Instructions can be found online at
att.com/equipmentinstall or by
scanning the QR code.
(Continued on back)
1
C
1