Enabling The Hibernation Command - Toshiba A10-S100 User Manual

104
Learning the Basics
Using Hibernation

Enabling the Hibernation command

Hibernation enabled is a default setting. If it should become
disabled, you can enable it as follows:
1 Click Start, Control Panel.
The Control Panel window appears.
2 Click Performance and Maintenance.
3 Double-click the Toshiba Power Saver icon.
The TOSHIBA Power Saver Properties window appears.
Sample TOSHIBA Power Saver Properties window
4 Click the Hibernate tab, then click the Enable
hibernate support check box.
5 Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.