2
In the Audio channels box, select the appropriate
speaker mode to match your setup as follows:
❖
If you have two speakers, select one of the 2 speaker
modes. Mono mixes the audio channels into one
channel. Stereo mixes the audio channels into two
channels.
3
In the Vocal options box, select the desired option for
DVDs that support vocal as follows:
❖
No vocal does not output vocals to any speaker.
❖
Left vocal outputs vocals to left speakers only.
❖
Right vocal outputs vocals to right speakers only.
❖
Both outputs vocals to both left and right speakers.
4
In the Dolby Pro Logic box, select the Always enable
check box to enable Dolby Pro Logic. Clear the check
box to disable it.
5
To test Dolby Pro Logic, click the Test button.
WinDVD
Customizing WinDVD
191