Table of Contents
Advertisement
2
In the Audio channels box, select the appropriate
speaker mode to match your setup as follows:
If you have two speakers, select one of the 2 speaker
modes. Mono mixes the audio channels into one
channel. Stereo mixes the audio channels into two
channels.
3
In the Vocal options box, select the desired option for
DVDs that support vocal as follows:
No vocal does not output vocals to any speaker.
Left vocal outputs vocals to left speakers only.
Right vocal outputs vocals to right speakers only.
Both outputs vocals to both left and right speakers.
4
In the Dolby Pro Logic box, select the Always enable
check box to enable Dolby Pro Logic. Clear the check
box to disable it.
5
To test Dolby Pro Logic, click the Test button.
WinDVD
Customizing WinDVD
187
Advertisement
Table of Contents
