Page 1
‘Get In The Game’ Football Toss Wall Supply List and Build Instructions Supply List LUMBER: Five (5) 8-foot 2x4s | One (1) 12-foot 2x4 | One (1) sheet of 4'x8'x½" plywood HARDWARE: One (1) box of 1 ½" #10 deck screws | One (1) box of 2 ½" #10 deck screws Six (6) ¼"-20x4"...
Page 2
‘Get In The Game’ Football Toss Wall Supply List and Build Instructions BUILD INSTRUCTIONS 1. Build 4' wide x 8' tall frame using three (3) 8-foot 2x4s. Use two (2) 8 footers for frame height, and cut one (1) 8' into two (2) 44 7/8"...
Page 3
‘Get In The Game’ Football Toss Wall Supply List and Build Instructions BUILD INSTRUCTIONS 4. Affix two (2) 8" sections (to center) 63 5/8" from bottom of frame. (See Diagrams 1-Side and 1-Back.) 5. Affix full sheet of 4'x8'x½" plywood to 4'x8' frame with 1 ½"...
Page 4
‘Get In The Game’ Football Toss Wall Supply List and Build Instructions BUILD INSTRUCTIONS 8. Attach ground support to 4'x8' with two (2) ¼"-20x4" carriage bolts, flat washers and wing nuts. 9. Cut two (2) 72 3/8" 2x4s to use as back supports between ground support and 4'x8' frame, with 9/32"...
Page 5
‘Get In The Game’ Football Toss Wall Supply List and Build Instructions BUILD DIAGRAMS DIAGRAM 1 - SIDE 8" " " " DIAGRAM 1 - BACK 8" 96" "...
‘Get In The Game’ Football Toss Wall Supply List and Build Instructions BUILD DIAGRAMS DIAGRAM 2A " DIAGRAM 2 48" 48" " 15/16 11" 11" 42" 42" " " CARE INSTRUCTIONS If football toss wall will be stored outside, treated lumber is recommended.