Table of Contents
Advertisement
Simulated I/O
Configuration
Interactive
Measurement
Configuration
External Analyzer
Configuration
Saving a
Configuration
4-20 Configuring the Emulator
The simulated I/O feature and configuration options are described in
the Simulated I/O Reference manual.
The interactive measurement configuration questions are described in
the chapter on coordinated measurements in the Softkey Interface
Reference manual. Examples of coordinated measurements that can be
performed between the emulator and the emulation analyzer are found
in the "Using the Emulator" chapter.
The external analyzer configuration options are described in the
Analyzer Softkey Interface User's Guide.
The last configuration question allows you to save the previous
configuration specifications in a file which can be loaded back into the
emulator at a later time.
Configuration file name? <FILE>
The name of the last configuration file is shown, or no filename is
shown if you are modifying the default emulator configuration.
If you press <RETURN> without specifying a filename, the
configuration is saved to a temporary file. This file is deleted when
you exit the Softkey Interface with the "end release_system" command.
When you specify a filename, the configuration will be saved to s file
specified with extensions of ".EA".
Ending out of emulation (with the "end" command) saves the current
configuration, including the name of the most recently loaded
Advertisement
Table of Contents
