(see “Sick Building Syndrome”). Before you Start Visit our website www.PyleUSA.com to download the PCO2MT05 Software. Button Functions BEFORE YOU START 1. This monitor contains sensors and microprocessors that use precision electronics.
DAY: Day MIN: Minute SEC: Seconds REC: Recording starts 3. Humidity Display Area % RH: Humidity Unit USING THE MONITOR Power and Charging The rst time you use the monitor, use the wall adapter or a powered PC port and Right Arrow Button - when MODE pressed, used as right arrow.
Using the CO2 Alarm • Double-click the le to start the installation. Click “Next” to begin: The CO2 alarm can warn you if carbon dioxide levels are too high. If the CO2 level goes over the level you set, a buzzer will sound. Press the left arrow button to turn the buzzer on or o .
DATA LOGGING Option 1: Tethered Data Logging Tethered data logging lets you record CO2 levels while connected to the PC. This option is useful for testing the logging functions or to creating several data logs at one time. Click “Set Param” to setup the data logging parameters. Set the parameters as appropriate for your application.
Page 6
Save the data as a le to your PC as shown: Option 2: Remote Data Logging Remote data logging lets you place the monitor in a room, start recording, then come back later and retrieve the monitor and download the data. This is useful for measuring air quality in a room over time.
AUTOMATIC BASELINE CALIBRATION Features: Automatic baseline calibration is useful in areas that are regularly unoccupied • Universal Indoor Air Quality (IAQ) Meter and CO2 level return to 400ppm every few days. ABC is turned o by default. • Measures Carbon Dioxide, Temperature, Humidity To enable ABC: •...