Table of Contents
Advertisement
LED Indicators
Viewing the Diagnostic List
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a second of each other:
Channel 5
DISPLAY
The Self Check list displays.
Results for all of the following diagnostic items are displayed at the bottom of the screen. No error has occurred if the screen displays a "0".
Resets all settings
to the Factory Defaults
Stored Data
from ADC calibration
(from factory)
Diagnostic
List
Clearing the Diagnostic List
CAUTION: To remove the error indicator number you have to reset the settings back to the Factory Defaults. This action over-writes all customer
settings. Before performing this reset, contact the customer to determine what adjustments they have made.
1. Using the remote commander, select Factory Default button.
2. To reset the Diagnostic List, select Yes.
3. To start Auto Program, select Yes.
4. Using the customers information, reset their adjustments.
KDL-32FA500/37FA500
Number of times
Diagnostic Item
TIMER/PIC OFF
Description
LED flashes
Main Power
2 times
DC Alert 1
3 times
DC Alert 2
4 times
DC Alert 3
5 times
Backlight
6 times
Temp
7 times
Audio
8 times
Volume +
TV POWER .
This is the SAME as accessing Service Adjustments.
Version: ER2.5L-AB14L DTT:32F5.P032.T004
Model Information:32FA500 4000493
Factory Default
Power On Time: 00001H
ADC Auto Calibration
Cr
Gain
402
ITU 709
Offset
1020
Gain
412
ITU 601
Offset
1020
Gain
454
VGA
8
Offset
2:MAIN POWER 0
3:DC ALERT1
0
4:DC ALERT2
0
5:DC ALERT3
0
NOTE: Allow 30+ minutes for Auto Program to complete.
Possible Location
BM4 BOARD
G1D Board (32")
G2D Board (37")
BM4 BOARD
BM4 BOARD
BM4 BOARD
BM4 BOARD
G1D Board (32")
G2D Board (37")
ETC-Inverter MT Board
LCD Panel
BM4 BOARD
Check Ventilation
BM4 BOARD
G1D Board (32")
G2D Board (37")
SMPTE
ColorBar100
Y
Cb
1560
404
128
1020
1600
420
128
1020
1856
462
8
8
6:BL
0
7:TEMP
1
8:Audio
0
101:WDT 0
KDL-32FA500/37FA500
Software Version
Model Information & Serial Number
Power Time
Indicates an error was detected
Indicates no error was detected
11
Advertisement
Table of Contents
