Table of Contents
Advertisement
Step 8: Configure your Internet-broadband settings
To configure your Internet-broadband settings, do the following:
1. Obtain the necessary IP and DNS settings from your DSL or cable modem
provider.
The IBM High Rate Wireless LAN Gateway is configured for Dynamic IP
Address and Automatic DNS settings. If your DSL or cable modem
provider is configured as a DHCP server, go to step 8.4.
If your DSL or cable modem provider provides you with information for a
Dynamic IP Address, Static/Fixed IP Address, or PPPoE for DSL Address,
go to the step 8.2.
2. Click Internet-broadband settings.
3. Configure your Internet-broadband settings.
Note: Some fields might not be used for all ISP configurations.
v If your ISP provides you with information for a Dynamic IP address,
click the Dynamic IP Address radio button, enter the appropriate
information in the fields, and then click Apply.
v If your ISP provides you with information for a Static/Fixed IP address,
click the Static/Fixed IP Address radio button, enter the appropriate
information in the fields, and then click Apply.
© Copyright IBM Corp. 2001
8-1
Advertisement
Table of Contents
