Wb/Mura/Cuc Data Transfer - Sony X900E Series Service Manual

WB/MURA/CUC DATA TRANSFER

(Please apply Main board or panel is replaced.)
1. In "Panel/PQ" service mode.
a. Go to "WB/Mura/CUC data transfer" category by "↑" or "↓".
Service Mode
Model Information
Self diagnosis History
Video / Audio
Panel / PQ
General Setting
Tuner
Wi-Fi / BT
SDB Service Menu
b. To select "WB/Mura/CUC data transfer", press "→" button.
c. To change data, press "←" or "→" button on remote commander.
Panel / PQ
Back
WB Adjustment
WB/Mura/CUC data transfer
XBR-49/55/65/75X900E
>>
>>
>>
>>
>>
>>
>>
>>
[</>] Set [Home]Exit
<<
>>
>>
[</>] Set [Home]Exit
2. In "WB/Mura/CUC data transfer".
a. Select "WB/Gamma data transfer" by pressing "↑" or "↓" button on remote commander.
b. To change the items, press "←" or "→" button on remote commander and press "Enter"
button.
Selectable items are:
0. SoC to T-con
1. T-con to SoC
2. No action
c. Similarly, select the items in Mura and CUC data.
d. Select "[start]" and press "Enter" button to start transfer.
Back
WB / Gamma data transfer <[ 0.Soc to T-con ]>
Mura data transfer <[ 0.Soc to T-con ]>
CUC data transfer <[ 0.Soc to T-con ]>
Start
*Please refer to another manual "Service Procedure for Panel, Board and Software Change /
Upgrade(P/N:98881800x)" for details. GN3TR chassis is the same as GN1T chassis basically.
ADJUSTMENT
<<
[</>] Set [Home]Exit
B-board T-con
replace replace
WB/ 1.T-con to 0.SoC to
Gamma Soc T-con
1.T-con to 0.SoC to
Mura
Soc T-con
1.T-con to 0.SoC to
CUC
Soc T-con
Panel
replace
0.SoC to
T-con
1.T-con
to Soc
1.T-con
to Soc
16