Usb; Bluetooth - Panasonic Technics OTTAVA f SC-C70MK2 Operating Instructions Manual

USB

The USB drive or its contents cannot be read.
• The USB drive format or its contents is/are not
compatible with the unit. (⇒ 107)
No response when [
• Disconnect the USB device and then reconnect
it. Alternatively, turn the unit to standby and on
again.
Slow operation of the USB flash drive.
• Large file size or high memory USB flash drive
takes longer time to read.
• It may take some time if there are a lot of files or
folders on it.
Cannot display the information properly.
• Track names, etc. may not be displayed properly.

Bluetooth

Pairing cannot be completed.
• Check the Bluetooth
The device cannot be connected.
• The pairing of the device was unsuccessful or the
registration has been replaced. Try re-pairing the
device. (⇒ 48)
• This unit might be connected to a different device.
Disconnect the other device and try re-pairing the
device.
The device is connected, but audio cannot be
heard through this unit.
• For some built-in Bluetooth
set the audio output to "SC-C70MK2" manually.
Read the operating instructions for the device for
details.
The sound is interrupted.
• The device is out of the 10 m communication
range. Bring the Bluetooth
system.
• Remove any obstacle between this system and the
device.
• Other devices that use the 2.4 GHz frequency
band (wireless router, microwaves, cordless
phones, etc.) are interfering. Bring the Bluetooth
device closer to this system and distance it from
the other devices.
• Select "Mode1" for stable communication. (⇒ 49)
] is pressed.
®
device condition.
®
98
devices, you have to
®
device closer to this
®
®
(Continued)