Table of Contents
Advertisement
Enable Data Roaming
Once you have activated the international roaming service, you can enable this feature to use
mobile data when traveling in a different country or region.
This feature requires the support of your mobile carrier. For details, contact your carrier.
•
Charges may apply when using the international roaming service. For details about
•
how data roaming fees are charged, contact your carrier.
Go to
Settings > Mobile network > Mobile data. Under the SIM card for which you
wish to enable the data roaming feature, enable Data roaming.
If your device has two SIM cards, configure separate settings for SIM 1 and SIM 2.
More Connections
NFC
Near Field Communication (NFC) is a short-range wireless communications technology that
allows mobile and other electronic devices to connect in countless ways.
Enable Read and write/P2P on the NFC settings screen if available. This feature may
vary depending on your carrier.
Enable or Disable NFC
You can enable or disable NFC as follows:
Swipe down from the status bar to open the notification panel, then swipe down further to
•
show all shortcut switches. Touch
to enter the NFC settings screen.
Go to
Settings > More connections > NFC, and toggle the NFC switch on or off.
•
Make Quick Payments with NFC
If you have installed a payment app (such as Alipay or WeChat) on your phone and enabled
the payment service, you can make payments with NFC.
1
Go to
Settings > More connections > NFC, and enable NFC.
2
Touch Default app on the NFC settings screen, then select a default payment app, like
WeChat.
3
Enable NFC payments in the payment app. For example, in WeChat, go to Me > Settings
> General and enable Enable NFC.
4
Hold the NFC sensor (located near the rear camera) of your phone against that of a POS
terminal to enter the payment screen automatically. Complete the payment with a
password or fingerprint.
to enable or disable NFC. Touch and hold the switch
Settings
77
Advertisement
Table of Contents
