Panel I2C Error - Sony KDL-32W6 E Series Service Manual

3d.1 : 5x Blinking – Panel I2C Error
BLM Board (General Checking)
START
Reinsert LVDS Flat
Flexible Cable (FFC) at B-Board and
Panel Side. Make sure FFC is fully
inserted.
5 Times Blinking happen?
YES
Replace LVDS Flat Flexible
Cable (FFC)
5 Times Blinking happen?
YES
TV set is OK now
No
NG Symptom:
Incorrect FFC Insertion
TV set is OK now
No
NG Symptom:
LVDS Cable NG
NO
Is 3V -3.33V available?
YES
Replace
O-Cell* or Panel Module*
5 Times Blinking happen?
YES
Replace B-Board
TV Boots Up Normally?
Refer to Panel I2C
Manual Checking
No
TV set is OK now
NG Symptom:
O-Cell/Panel Issue NG
Yes
TV set is OK now
NG Symptom:
B-Board Issue NG
* O-Cell or Panel
Module replacement
depends on service
capabilities
31