Table of Contents
Advertisement
Part 6: Using tools for advanced configuration
This section provides instructions for advanced configuration in the Web-based
interface.
Advanced configuration
Click Advanced Configuration to display the Advanced Configuration table.
LAN configuration
To configure your local area network (LAN), click Advanced Configuration,
and then click LAN Configuration to display the Lan Configuration table.
In this table, you can change the TCP/IP settings of the Ethernet LAN interface
of the Gateway.
v MAC Address: This changes the media access control (MAC) address of the
LAN interface. It is displayed in six pairs of hexadecimal numbers.
Note: This field is read-only.
v LAN IP Address: This is the IP address of the LAN interface of the
Gateway. The IP address value uses dotted decimal notation (N.N.N.N, with
N being a value from 0 to 255). The default is 192.168.1.1. This is the IP
address that client computers on the LAN use as their default gateway, as
well as on their DNS server if you want to use the built-in DNS feature of
the Gateway.
© Copyright IBM Corp. 2001
6-1
Advertisement
Table of Contents
