SECTION 7 - SERVICE ADJUSTMENTS
OVERVIEW
As mentioned in
"Section 2 - Software Requirements" on page
the models in this manual utilize a "generic" type main board,
therefore certain service adjustments settings must be changed or
confirmed when either the main Board, LCD Panel, or TCON Board
are replaced.
UPDATING THE SOFTWARE
After replacing the main Board, LCD Panel, or TCON Board, you
MUST UPDATE the SOFTWARE to the latest version. .
KDL-32EX427/32EX527/40EX527/46EX527
ACCESSING SERVICE ADJUSTMENT
MODE
12,
1. TV must be in standby mode. (Power off).
2. Access Service Mode by pressing the following buttons
on the Remote Commander within a second of each
other:
DISPLAY
VOLUME+
Channel 5
Volume +
POWER
DISPLAY
5
RM-YD064
POWER .
53