Rear; Bnc Connectors (Option) - Samsung SyncMaster 591S Manual

General
Unpacking
Front

Rear

Bottom
1. Power port
2. Signal Cable

BNC Connectors (Option)

1. Power port
2. Signal port
3. BNC Connectors
(Option)
Note: See
SyncMaster 591S/793S/591V/793V/783DF/795DF
(The configuration at the back of the monitor may vary from product to product.)
Connect the power cord for your monitor to the power port on the back of
the monitor.
Connect the signal cable to the video port on your computer, video board,
video card, or graphics card.
(The configuration at the back of the monitor may vary from product to product.)
Connect the power cord for your monitor to the power port on the back of
the monitor.
Connect the signal cable to the 15-pin D-sub connector on the back of
your monitor.
Connect the signal cable to the BNC signal port on the back of your
monitor.
Connecting the Monitor
793DF/797DF/997DF/793MB/795MB
for further information regarding cable connections.
SyncMaster 997DF