Connections
Connecting Cables
Connecting to a Computer
Connect the power cord for your monitor to the POWER port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
•
Connect the signal cable to the [PC IN] port on the back of your monitor.
Using the DVI (Digital) connector on the video card.
•
Connect the DVI Cable to the [DVI-D IN] Port on the back of your Monitor.
Connect the [HDMI / PC / DVI-D AUDIO IN] port on the rear side of the monitor to the
sound card of the PC.
Note
•
You may enjoy clear and quality sound from the computer sound card using the monitor
speakers. (You don't need to install any separate speakers for your computer.)
•
You may get a blank screen depending on the type of video card you are using, if you
connect simultaneously both the D-sub and DVI cables to one computer.
•
If you connect properly your monitor using the DVI connector but get a blank or fuzzy
screen, check to see if the monitor status is set to analogue. Press 'SOURCE [
to have the monitor double-check the input signal source.
[PC IN]
[DVI-D IN]
]' button