Connecting The Video Out To Your Tv; Connecting Audio From External Components; Listening To Radio - Samsung HT-X810 Quick Start Manual

4 connecting the video out to your tv

Choose one of the three methods for connecting to a TV.
HDMI OUT
HDMI OUT
METHOD3
METHOD1 METHOD2
(supplied)
METHOD 1 : HDMI
(BEST QUALITY)
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV.
METHOD 2 : Component Video
(BETTER QUALITY)
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video
Output (Pr, Pb and Y) jacks on the back of the DVD Player to the Component Video Input jacks on your TV.
METHOD 3 : Composite Video
(GOOD QUALITY)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on your TV.
M
This product operates in Interlace scan mode (480i) for component output.
If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home Theater
using the TV's remote control. This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).
Please check the logo (If your TV has an logo, then it supports the Anynet+ function.)
4 - English

5 connecting audio from external components

AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player.
1. Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external
component/MP3 player.
2. Press the AUX button on the remote control to select AUX1 input.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD ¨ D.IN ¨ AUX 1 ¨ AUX 2 ¨ USB ¨ BT AUDIO ¨ FM.
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
1. Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out
of the external analog component.
• Be sure to match connector colors.
2. Press the AUX button on the remote control to
select AUX 2 input.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD ¨ D.IN ¨ AUX 1 ¨ AUX 2 ¨ USB ¨ BT AUDIO ¨
FM.
M
You can connect the Video Output jack of your VCR to
the TV, and connect the Audio Output jacks of the VCR
External Analog Component
to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1. Connect the Digital Input (OPTICAL) on the Home Theater to the
Digital Output of the external digital component.
2. Press the AUX button on the remote control to select DIGITAL IN.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD ¨ D.IN ¨ AUX 1 ¨ AUX 2 ¨ USB ¨ BT AUDIO ¨
FM.
5 - English

6 listening to radio

Connecting the FM Antenna
Audio Cable
(not supplied)
Audio OUT
1.
2.
Listening to Radio
HDMI OUT
Audio Cable (not supplied)
If the external analog component
has only one Audio Out, connect
either left or right.
HDMI OUT
Optical Cable
(not supplied)
External Digital Component
HDMI OUT
FM Antenna
(supplied)
Connect the FM antenna supplied to the FM 75 COAXIAL Jack.
Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or
other rigid surface.
Remote Control
1. Press the TUNER button to select the FM band.
2. Tune in to the desired station.
• Automatic Tuning 1 : When the #,$ button is pressed, a preset broadcast station is selected.
• Automatic Tuning 2 : Press and hold the , , . button to automatically search for active broadcasting stations.
• Manual Tuning : Briefl y press the , , . button to increase or decrease the frequency incrementally.
Main Unit
1. Press the FUNCTION button to select the FM band.
2. Select a broadcast station.
• Automatic Tuning 1 : Press the STOP ( ) button to select PRESET and then press the #,$ button to select the
preset station.
• Automatic Tuning 2 : Press the STOP ( ) button to select MANUAL and then press and hold the #,$ button to
automatically search the band.
Manual Tuning : Press the STOP ( ) button to select MANUAL and then briefl y press the #,$ button to tune in to a
•
lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
• Each time the button is pressed, the sound switches between STEREO and MONO.
• In a poor reception area, select MONO for a clear, interference-free broadcast.
6 - English