Advertisement
Blinking
Mode
On
Flash one time
Flash twice
Button
Factory Reset
LED On/Off
Interface
LAN
AP mode: The system is scanning the surrounding
network. Or WPS is enabled and the system is
waiting for response from the wireless client.
Mesh mode: trying to connect to mesh network
Extender mode: trying to connect to other AP.
VigorAP is configured as AP mode.
VigorAP is configured as Mesh Node mode.
VigorAP is configured as Range Extender mode.
Press it for more than 15 seconds. When the ACT
LED flashes rapidly, release the button.
Press it and release it within 2 seconds.
Explanation
Connector for Ethernet device.
You can connect any Ethernet network devices, such as a PC, TV,
camera and anything else you want to put on your networks.
Advertisement
