Advertisement
Smart Touch Control
Improved user convenience has been provided so that you can switch the channel and adjust the volume with just your fingertips while focusing
on the TV screen. In addition, the built-in touch pad removes the need for a mouse when you change the menu settings and search for
something on the Internet.
% For more detailed information about using the Smart Touch Control, refer to Smart Touch Control Guide
Touch Control
Guide).
% Voice Control performance levels will vary based on the language spoken.
% Install the IR Blaster within 50 cm and 45 degrees in up, down, left and right from the IR sensor of the external device.
Turns the TV on and off.
Š: Displays a list of recently used functions.
y: Adjusts the Volume.
Displays the shortcut functions list.
RETURNR: Go to previous menu screen.
VOICE˜: Take your voice command and
enter a text using your voice.
NUMBERš: Displays the Number button
screen. Select a digit using the touch pad.
Brings up the Smart Hub applications.
Installing batteries (Battery size : AA)
Initial Pairing
TV
STB BD
TV
STB BD
RETURN
VOICE
Press any buttons on the Smart Touch Control toward the Remote receiver of TV's.
1
The connection icons appear on the bottom left of the screen, and the TV connects to your
2
Smart Touch Control automatically.
% If you want to perform the pairing process again, press the
the back cover. The Smart Touch Control will be initialized.
English - 2
You can use
MIC
command. To activate MIC, simply press the
VOICE˜
button.
LED to show the active device.
Shows the color button, exit button and play control
buttons.
T: Quickly select frequently used functions.
z: Changes channels.
Touch Pad
• Scratch on the Touch Pad to move the focus on the
screen.
• Click on the Touch Pad to run the focused item.
NUMBER
• Tap on the Touch Pad and hold to select the function
the same as the
control. However, this action scrolls the page on a
Web Browser.
• Tap on the Touch Pad or press the
button to return to the normal state.
% If no button is pressed for 30 seconds, the Touch
Pad is automatically turned off.
% To use the Touch Pad again, press any button.
Press the back of the remote at the very bottom
1
with both thumbs, and then slide the battery
cover up in the direction of the arrow.
Install two batteries so that the polarity of the
2
batteries (+/-) matches the illustration in the
battery compartment.
Slide the cover down in the direction of the arrow
3
to close the battery cover.
PAIRING
→
→
(‹
Support
Smart
to instruct a Voice Control
MUTEM
button of the remote
RETURNR
button in the center of
Advertisement
