Remote Control Functions - Philips 5504 Series User Manual

Chapter 1

Remote Control Functions

Most of your television's functions are available on the menu that appear on the screen. The remote control
supplied with your set can be used to navigate through the menus and to con gure all the general settings.
Note: The location and names of the buttons on the remote control may vary according to TV model, and not
all buttons available on all models.
Source/Input Press to select signal source.
(POWER ) Turns the TV on or o .
Brings up the tuner selection menu.
TV
Brings up the SOURCE menu.
SOURCE
(Numeric buttons) Enters channel numbers.
0-9
•
(dot) Enters a digital channel with a sub-channel, enters the main channel;
then, press the dot (•), the sub-channel, and then the OK button.
Goes to the YouTube homepage.
VOL +/-
(VOLUME UP/DOWN) Increases or decreases the TV's volume.
(MUTE) Turns the volume o or on.
(HOME) Goes to the homepage.
CH +/-
(CHANNEL UP/DOWN) Scans up or down through the current channel list.
Goes to the Net ix homepage.
Note: This button may be goes to the Golive homepage for some models
Goes to the browser homepage.
(SETTING) Brings up the menu system
Zoom -/+ Select the desired screen format.
(Up, down, left and right direction buttons) Highlights di erent items in
▲▼◄►
the menu system and adjusts the menu controls.
OK Con rms your selection.
(BACK button) In menu mode, goes back to the previous menu or
interface; in TV mode, goes back to the last viewed channel.
Exits the menu system.
EXIT
Displays the status information.
INFO
USB Enters the USB mode.
Enters the option menu.
.
7
Introduction
.